Dr. Barry Hojjatie, Coordinator
Room 2023, Nevins Hall
Engineering Transfer Programs
Engineering is the application of mathematical and scientific principles, technological tools, and practical experience to the solution of real-world problems. The Engineering Studies Program at Valdosta State University is part of the Department of Physics, Astronomy, and Geosciences. No degree in engineering is offered; however, courses from engineering, the sciences, mathematics, computer science, the humanities, and the social sciences provide a strong and intensive curriculum that effectively covers two to three years of work for a wide variety of engineering fields. The remaining course work required for a Bachelor’s degree is completed by transfer to a four-year engineering institution. Formal agreements exist for transfer to the Georgia Institute of Technology and to Mercer University, but informal transfer arrangements can also be made with other qualified institutions.
The Engineering Studies Program is designed to prepare students to transfer as third-year students into an engineering curriculum at a degree-granting institution. A major part of this program is the Regents’ Engineering Transfer Program (RETP), administered by the Georgia Institute of Technology. The program covers course work through the first two years in four major tracks: civil engineering, electrical and computer engineering, industrial engineering, and mechanical and aerospace engineering. Other alternatives for transfer in engineering include the Mercer University Transfer Program in biomedical engineering, computer engineering, electrical engineering, environmental engineering, industrial engineering, and mechanical engineering; and the regular transfer option to the engineering programs at the University of Georgia, Southern Polytechnic University, and Georgia Southern University. The regular transfer program option also includes transfer to other universities in Georgia to complete a Bachelor of Science degree in an engineering technology major. In addition to the RETP, another degree program with the Georgia Institute of Technology, the Engineering Dual Degree Program, enables students to earn a B.S. degree from VSU as well as a B.S. in Engineering from Georgia Tech. Additional information about this program is given at the end of this section.
Students who desire to enter one of these programs should consult the engineering studies coordinator as early as possible to understand the requirements of the program and to develop an acceptable program of study. This contact is particularly important for planning the specialized Dual Degree curriculum.
Students in the Engineering Studies Program may be able to gain related work experience through the VSU Co-op Program. Such experience may prove valuable in terms of career exploration, acquisition of new skills, and career development. In most cases, the Co-op work contract can be continued without interruption after a student transfers to a four-year engineering school. Students seeking more information should contact the Coordinator of Engineering Studies or the Office of Career Opportunities.
Selected Educational Outcomes
- Students will demonstrate understanding of fundamental sciences through application to problem solving and experimental laboratory analysis.
- Students will demonstrate understanding of mathematics through application to mathematical analysis and problem solving.
- Students will be able to apply scientific and mathematical principles to solve engineering problems.
- Students will demonstrate the effective use of computers through application packages, programming, scientific calculations, and graphical applications.
Examples of Outcome Assessments
The curricula used at VSU to prepare engineering students to transfer are controlled primarily by the courses required at the degree-granting institutions. To be accepted as transfer credit, VSU courses must duplicate the corresponding courses at the transfer institution. Assessment of the VSU engineering program must therefore monitor the individual course contents, which can change from time to time, as well as the success of the students who transfer. To monitor the progress of students who transfer, records of the final grades, degree conferred, and any honors received are maintained and examined annually to determine the effectiveness of the Engineering Studies Program. Transfer students are also asked to provide an evaluation of their VSU engineering preparation during their final year before graduation.
Recommended Courses for the Regents’ Engineering Transfer Program
Engineering students are required to meet the Core Curriculum of the Georgia Institute of Technology by taking MATH 2261 in Area A, MATH 2262 and an approved lab science sequence in Area D, and CS 1010 in Area B.
| Core Curriculum Area A | ||
| ENGL 1101 | Composition I | 3 |
| or ENGL 1101H | Honors Composition I | |
| ENGL 1102 | Composition II | 3 |
| or ENGL 1102H | Honors Composition II | |
| MATH 2261 | Analytic Geometry and Calculus I 1 | 4 |
| Core Curriculum Area B | ||
| CS 1010 | Algorithmic Problem Solving | 3 |
| MATH 2261 | Analytic Geometry and Calculus I 2 | 4 |
| Core Curriculum Area C | ||
| See course requirements for Area C in the VSU Core Curriculum | 6 | |
| Core Curriculum Area D | ||
| Select eight hours from the following: | 8 | |
| Principles of Biology I | ||
| Principles of Chemistry I and Principles of Chemistry Laboratory I | ||
| Principles of Chemistry II and Principles of Chemistry Laboratory II | ||
| Principles of Physical Geology | ||
| Principles of Physics I | ||
| Principles of Physics II | ||
| MATH 2262 | Analytic Geometry and Calculus II 3 | 4 |
| Core Curriculum Area E | ||
| See course requirements for Area E in the VSU Core Curriculum | 12 | |
| Core Curriculum Area F | ||
| PHYS 2211K | Principles of Physics I | 4 |
| Lab Science Sequence 4 | 0-8 | |
| ENGR 2010 | Introduction to Engineering | 2 |
| MATH 2262 | Analytic Geometry and Calculus II 5 | 4 |
| MATH 2263 | Analytic Geometry and Calculus III | 4 |
| MATH 3340 | Ordinary Differential Equations | 3 |
| 1 | 1 hour counts in Area B |
| 2 | 3 hours count in Area A |
| 3 | 1 hour counts in Area F |
| 4 | if not taken in Area D |
| 5 | 3 hours count in Area D |
The engineering studies curriculum for each track is shown below:
Valdosta State University Engineering Studies Curriculum for Transfer to the Georgia Institute of Technology in Civil Engineering
| First Year | |||
|---|---|---|---|
| Fall | Hours | Spring | Hours |
| MATH 1113 | 3 | MATH 2261 | 4 |
| CHEM 1211 & 1211L | 4 | CS 1010 | 3 |
| ENGR 2010 | 3 | ENGR 2500 | 3 |
| ENGL 1101 | 3 | ENGL 1102 | 3 |
| POLS 1101 | 3 | HIST 2111 or 2112 | 3 |
| 16 | 16 | ||
| Second Year | |||
| Fall | Hours | Spring | Hours |
| MATH 2262 | 4 | MATH 2263 | 4 |
| PHYS 2211K | 4 | PHYS 2212K | 4 |
| CS 1301 | 4 | ENGR 2200 | 3 |
| Select one of the following: | 3 | BIOL 1107K | 4 |
| ENGL 2111 | 3 | ||
| ENGL 2112 | 3 | ||
| ENGL 2113 | 3 | ||
| 15 | 15 | ||
| Third Year | |||
| Fall | Hours | Spring | Hours |
| MATH 3340 | 3 | MATH 2150 | 3 |
| ENGR 3210 | 3 | ENGR 3220 | 3 |
| Area C6 | 3 | ECON 2105 or 2106 | 3 |
| GEOL 1121K | 4 | Area C6 | 3 |
| KSPE 2000 | 2 | Area E | 3 |
| 15 | 15 | ||
| Total Hours: 92 | |||
| 6 | COMM 1100 and ENGL 3020: recommended but not required ECON 2105 or ECON 2106 is acceptable for the economics requirement. |
Other supported courses: CS 1302, MATH 3600.
Valdosta State University Engineering Studies Curriculum for Transfer to the Georgia Institute of Technology in Computer Engineering or Electrical Engineering
| First Year | |||
|---|---|---|---|
| Fall | Hours | Spring | Hours |
| MATH 1113 | 3 | MATH 2261 | 4 |
| CHEM 1211 & 1211L | 4 | CS 1010 | 3 |
| ENGR 2010 | 3 | Area C7 | 3 |
| ENGL 1101 | 3 | ENGL 1102 | 3 |
| POLS 1101 | 3 | HIST 2111 or 2112 | 3 |
| 16 | 16 | ||
| Second Year | |||
| Fall | Hours | Spring | Hours |
| MATH 2262 | 4 | MATH 2263 | 4 |
| PHYS 2211K | 4 | PHYS 2212K | 4 |
| CS 1301 | 4 | ENGR 2310 | 4 |
| Select one of the following: | 3 | Area C7 | 3 |
| ENGL 2111 | 3 | ||
| ENGL 2112 | 3 | ||
| ENGL 2113 | 3 | ||
| 15 | 15 | ||
| Third Year | |||
| Fall | Hours | Spring | Hours |
| MATH 3340 | 3 | MATH 2150 | 3 |
| ENGR 3320 | 3 | ENGR 22007 | 3 |
| CS 1302 | 4 | Area D8 | 3 |
| ECON 2105 or 2106 | 3 | ENGR 2320 | 3 |
| Area E | 3 | KSPE 2000 | 2 |
| 16 | 14 | ||
| Total Hours: 92 | |||
| 7 | ENGR 2500, COMM 1100, ENGR 2200: recommended but not required. ECON 2105 or ECON 2106 is acceptable for the economics requirement. |
| 8 | Area D can be satisfied by BIOL 1107K, CHEM 1212, or GEOL 1121K. |
Valdosta State University Engineering Studies Curriculum for Transfer to the Georgia Institute of Technology in Industrial Engineering
| First Year | |||
|---|---|---|---|
| Fall | Hours | Spring | Hours |
| MATH 1113 | 3 | MATH 2261 | 4 |
| Area D9 | 4 | CS 1010 | 3 |
| ENGR 2010 | 3 | ENGR 250010 | 3 |
| ENGL 1101 | 3 | ENGL 1102 | 3 |
| POLS 1101 | 3 | HIST 2111 or 2112 | 3 |
| 16 | 16 | ||
| Second Year | |||
| Fall | Hours | Spring | Hours |
| MATH 2262 | 4 | MATH 2263 | 4 |
| PHYS 2211K | 4 | PHYS 2212K | 4 |
| CS 1301 | 4 | CS 1302 | 4 |
| Select one of the following: | 3 | Area C9 | 3 |
| ENGL 2111 | 3 | ||
| ENGL 2112 | 3 | ||
| ENGL 2113 | 3 | ||
| 15 | 15 | ||
| Third Year | |||
| Fall | Hours | Spring | Hours |
| Area D10 | 4 | MATH 2150 | 3 |
| PSYC 1101 | 3 | ENGR 2200 | 3 |
| ECON 2105 | 3 | ECON 2106 | 3 |
| MATH 3600 | 3 | ENGL 3020 | 3 |
| KSPE 2000 | 2 | ||
| 15 | 12 | ||
| Total Hours: 89 | |||
| 9 | |
| 10 | Area D can be satisfied by two of these courses: CHEM 1211/CHEM 1211L, CHEM 1212/CHEM 1212L, BIOL 1107K, and GEOL 1121K. |
Valdosta State University Engineering Studies Curriculum for Transfer to the Georgia Institute of Technology in Aerospace Engineering or Mechanical Engineering
| First Year | |||
|---|---|---|---|
| Fall | Hours | Spring | Hours |
| MATH 1113 | 3 | MATH 2261 | 4 |
| CHEM 1211 & 1211L | 4 | CS 1010 | 3 |
| ENGR 2010 | 3 | ENGR 2500 | 3 |
| ENGL 1101 | 3 | ENGL 1102 | 3 |
| POLS 1101 | 3 | HIST 2111 or 2112 | 3 |
| 16 | 16 | ||
| Second Year | |||
| Fall | Hours | Spring | Hours |
| MATH 2262 | 4 | MATH 2263 | 4 |
| PHYS 2211K | 4 | PHYS 2212K | 4 |
| CS 1301 | 4 | ENGR 2200 | 3 |
| Select one of the following: | 3 | Area C11 | 3 |
| ENGL 2111 | 3 | ||
| ENGL 2112 | 3 | ||
| ENGL 2113 | 3 | ||
| 24 | 14 | ||
| Third Year | |||
| Fall | Hours | Spring | Hours |
| MATH 3340 | 3 | MATH 2150 | 3 |
| ENGR 3210 | 3 | ENGR 3220 | 3 |
| Area D12 | 4 | ECON 2105 or 2106 | 3 |
| Area E | 3 | ENGL 3020 | 3 |
| KSPE 2000 | 2 | ||
| 15 | 12 | ||
| Total Hours: 97 | |||
| 11 | COMM 1100, ENGL 3020: recommended but not required. ECON 2105 or ECON 2106 is acceptable for the economics requirement. |
| 12 | Area D can be satisfied by BIOL 1107K, CHEM 1212/CHEM 1212L, or GEOL 1121K |
Recommended Courses for Regular Transfer to the University of Georgia
All Majors (agricultural engineering, biological engineering): Students should follow the recommended courses for Regents’ Engineering Transfer Program, Mechanical Engineering.
Dual Degree Program
The Dual Degree Program offers a student the opportunity to earn a Bachelor of Science degree from Valdosta State University and, in addition, a Bachelor of Science degree in engineering from the Georgia Institute of Technology within a total time period of approximately five years. Three-fourths of the Valdosta State University degree requirements are completed before transfer to the Georgia Institute of Technology (nominally three years), while the remaining Valdosta State University degree requirements and the remaining engineering degree requirements are completed at the Georgia Institute of Technology (nominally two years). The bachelor’s degree from Valdosta State University may be awarded when the student has satisfied the degree requirements.
The major selected at Valdosta State University should be one that can easily incorporate the mathematics and science courses required in the first two years of the engineering field the student plans to enter, i.e., applied mathematics, computer science, physics, or chemistry. Other majors make the five-year time period unfeasible. The second degree at the Georgia Institute of Technology may be selected from any of the fields of engineering.
Recommended Courses for the Dual-Degree Program
Major: See course requirements for VSU major. Students must complete at least 90 hours at VSU before transferring. See the Dual Degree Coordinator for additional requirements that must be satisfied before transferring.
Supporting Courses/Electives: Students take the following courses as they fit into the major requirements at VSU and the engineering requirements at Georgia Tech:
| ENGR 2010 | Introduction to Engineering | 3 |
| ENGR 2200 | Statics | 3 |
| ENGR 2310 | Introduction to Signal Processing | 4 |
| ENGR 2500 | Engineering Graphics for Design | 3 |
| ENGR 3210 | Dynamics | 3 |
| ENGR 3220 | Mechanics of Deformable Bodies | 3 |
| ENGR 3320 | Circuit Analysis | 3 |
| MATH 2150 | Introduction to Linear Algebra | 3 |
| MATH 3340 | Ordinary Differential Equations | 3 |
The remaining 30 (or fewer) hours required for the VSU degree must be taken at Georgia Tech, to be accepted as transfer credit by VSU.
ENGR 1010. Technological Problem Solving. 3 Hours.
Prerequisite: MATH 1111 or higher. Development of the features and principles of problem solving techniques based on a variety of fundamental models for general application, such as physical component, sketching, graphical, and mathematical models. Emphasis is placed on solving problems of a technological nature.
ENGR 2001. Principles and Applications of Engineering Materials. 3 Hours.
Prerequisite: CHEM 1211. A treatment of structures, properties, processing, and performance of engineering materials and their relationships. The course introduces the molecular and microstructural basis for electrical, optical, thermal, and mechanical properties of engineering materials including metals, ceramics, polymers, semiconductors, and composites.
ENGR 2010. Introduction to Engineering. 3 Hours.
Interpretation of the scope of engineering; introduction to engineering disciplines that form the basis for a variety of career opportunities; engineering design as creative problem solving; lessons from design failures; professionalism and ethics; introduction to problem solving using MATLAB.
ENGR 2200. Statics. 3 Hours.
Prerequisite: PHYS 2211. Prerequisite or corequisite: MATH 2263. Elements of statics in two and three dimensions; forces and moments; particles, objects, and structures in equilibrium; centroids; distributed forces and beams; friction.
ENGR 2310. Introduction to Signal Processing. 4 Hours.
Prerequisites: CS 1301 and MATH 2262. Introduction to signal processing for discrete-time and continuous-time signals. Filtering, frequency response, Fourier Transform, Z Transform. Laboratory emphasizes computer-based signal processing.
ENGR 2320. Introduction to Computer Engineering. 3 Hours.
Prerequisites: CS 1301 and MATH 2262. Computer system and digital design principles; architectural concepts, software, Boolean algebra, number systems, combinational datapath elements, sequential logic, and storage elements; design of DRAM control and I/O bus.
ENGR 2500. Engineering Graphics for Design. 3 Hours.
Introduction to engineering design and three-dimensional visualization; geometric construction; graphical projection and sketching; introduction to descriptive geometry; computer graphics.
ENGR 3210. Dynamics. 3 Hours.
Prerequisite: ENGR 2200. Kinematics and kinetics of particles; kinematics and kinetics of rigid bodies in plane motion; kinematics and kinetics of rigid bodies in three-dimensional motion.
ENGR 3220. Mechanics of Deformable Bodies. 3 Hours.
Prerequisite: ENGR 2200. Definition and analysis of strain and stress, applications to axially loaded elements, torsion of circular shafts and bending of beams, introduction to simple plasticity and column stability.
ENGR 3320. Circuit Analysis. 3 Hours.
Prerequisites: ENGR 2310 and PHYS 2212. Corequisite: MATH 3340. Introduction to the basic concepts of DC and AC circuit theory and analysis.
ENGR 4310. Thermodynamics. 3 Hours.
Also offered as PHYS 4310. Prerequisites: PHYS 2211, PHYS 2212, MATH 2263, or consent of the instructor. Basic principles of classical thermodynamics, which includes open and closed systems for both steady and transient processes.
ENGR 4950. Directed Study in Engineering. 1-3 Hours.
Prerequisites: Junior standing; permission of advisor, instructor, and Department Head. Study in an area or subject not normally found in established courses offered by the department; may also allow student to explore in more depth an area or subject covered by the pre-engineering program. Up to maximum of 3 hours.
